This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed for flat-surface roofs, including slate and shingle. The profile bonds directly to the roof surface using Sikaflex FC-11 adhesive, making it a flexible option for heritage homes and other roofs where lifting tiles isn't practical.

The 5.4mm aperture (hole size) of the mesh blocks large debris like palm fronds, bamboo leaves and large eucalyptus leaves. Best suited for properties with large-leafed trees that drop large foliage. If the trees around your property drop smaller leaves or needles you may need the finer 2mm or 4mm apertures instead.

Steel is the strongest material in our gutter mesh range. It provides a robust physical barrier against pests such as possums, birds and rodents, helping to prevent them from accessing your roof space.

Is your home in a bushfire area?

This is a screw-free kit, made for homes outside bushfire (BAL) zones. The mesh itself is non-combustible, but the adhesives and clips that hold it in place are not, so it is not compliant for BAL-rated areas under AS3959:2018. If your home is in a bushfire-prone area, we make a screw-fixed system that is compliant, so talk to us and we will help you choose. Learn more about bushfire and ember guard compliance.

• Woven and welded from 0.7mm thick steel strands, then hot zinc dipped and finished with a durable powder coat

• Screw-free roof fitting, screw-down gutter fixing

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 33 colours available designed to match the COLORBOND® range

• 5.4mm steel mesh roll (300mm wide)

• Screw-free flat profiles for the roof-side installation

• Screw-down standard metal gutter trim and pilot tip screws for the gutter-side installation

• Everything is provided in the colour you select

This kit uses screw-free flat profiles to secure the mesh to your roof. The profiles bond to the roof surface using Sikaflex FC-11 adhesive (not included in kit). On the gutter side, the screw-down standard metal gutter trim is fastened to the gutter lip with pilot tip screws, holding the mesh firmly in place. Learn more about our pilot tip screws.

For increased load-bearing capacity, this kit is also available with our screw-down multi-lock trim, which increases the strength of the mesh connection by over 200%. You can switch your gutter fitting to the screw-down multi-lock trim above. [learn more about our screw-down multi-lock trim.]

This product is backed by a 15 year product warranty.