This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed for bullnose roofing, the curved metal profile often found on the verandahs and awnings of older Australian homes.

The 4mm aperture (hole size) of the mesh blocks medium and large leaves, including gum leaves, gumnuts and silky oak. Best suited for properties where the surrounding trees produce medium-sized foliage rather than fine needles or small leaves. If the trees around your property include wattle, jacaranda, poinciana or pine, you may need the finer 2mm aperture instead.

Steel is the strongest material in our gutter mesh range. It provides a robust physical barrier against pests such as possums, birds and rodents, helping to prevent them from accessing your roof space.

This 4mm steel mesh is compliant for use as a gutter guard in bushfire-prone areas under AS3959:2018 for every BAL level: BAL 12.5, 19, 29, 40 and FZ (Flame Zone). This product is not an ember guard. If you need an ember guard, or more information on the difference between gutter guard and ember guard compliance, please visit our bushfire education page or talk to our team.

• Woven and welded from 0.6mm thick steel strands, then hot zinc dipped and finished with a durable powder coat

• Non-combustible and compliant for use as a gutter guard in bushfire-prone areas under AS3959:2018 for BAL 12.5, 19, 29, 40 and FZ. [learn more about bushfire and ember guard compliance.]

• Screw-down roof fitting, screw-down gutter fixing

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 33 colours available designed to match the COLORBOND® range

• 4mm steel mesh roll (450mm wide)

• Screw-down bullnose profiles and pilot tip screws for the roof-side installation

• Screw-down standard metal gutter trim and pilot tip screws for the gutter-side installation

• Everything is provided in the colour you select

This kit uses screw-down bullnose profiles to secure the mesh to your roof, fastened with pilot tip screws. On the gutter side, the screw-down standard metal gutter trim is fastened to the gutter lip with pilot tip screws, holding the mesh firmly in place. Learn more about our pilot tip screws.

For increased load-bearing capacity, this kit is also available with our screw-down multi-lock trim, which increases the strength of the mesh connection by over 200%. You can switch your gutter fitting to the screw-down multi-lock trim above. [learn more about our screw-down multi-lock trim.]

This product is backed by a 15 year product warranty.