This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed to suit a range of ribbed metal roof profiles, including Klip-Lok®, Trimdek®, Spandek® and Longspan®. The 1-inch profile is small enough to fit between the ribs on different roof types, making it a flexible option.

The 2mm aperture (hole size) of the mesh blocks leaves of all sizes, from large palm fronds and bamboo down to fine wattle, jacaranda and poinciana leaves. Best suited for properties with fine-leafed trees or where you want the highest level of leaf protection.

Steel is the strongest material in our gutter mesh range. It provides a robust physical barrier against pests such as possums, birds and rodents, helping to prevent them from accessing your roof space.

Is your home in a bushfire area?

This is a screw-free kit, made for homes outside bushfire (BAL) zones. The mesh itself is non-combustible, but the adhesives and clips that hold it in place are not, so it is not compliant for BAL-rated areas under AS3959:2018. If your home is in a bushfire-prone area, we make a screw-fixed system that is compliant, so talk to us and we will help you choose. Learn more about bushfire and ember guard compliance.

• Woven and welded from 0.5mm thick steel strands, then hot zinc dipped and finished with a durable powder coat

• Screw-free roof fitting, screw-down gutter fixing

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 33 colours available designed to match the COLORBOND® range

• 2mm steel mesh roll (915mm wide)

• Screw-free mini profiles for the roof-side installation

• Screw-down flat metal gutter trim and pilot tip screws for the gutter-side installation

• Everything is provided in the colour you select

This kit uses screw-free mini profiles to secure the mesh to your roof. The profiles bond to the roof surface using Sikaflex FC-11 adhesive (not included in kit). On the gutter side, the screw-down flat metal gutter trim sits flush against the gutter edge and is fastened with pilot tip screws. Learn more about our pilot tip screws.

For increased load-bearing capacity, this kit is also available with our screw-down multi-lock trim, which increases the strength of the mesh connection by over 200%. You can switch your gutter fitting to the screw-down multi-lock trim above. [learn more about our screw-down multi-lock trim.]

This product is backed by a 15 year product warranty.