This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed for bullnose roofing, the curved metal profile often found on the verandahs and awnings of older Australian homes.

The 2mm aperture (hole size) of the mesh blocks leaves of all sizes, from large palm fronds and bamboo down to fine wattle, jacaranda and poinciana leaves. Best suited for properties with fine-leafed trees or where you want the highest level of leaf protection.

Steel is the strongest material in our gutter mesh range. It provides a robust physical barrier against pests such as possums, birds and rodents, helping to prevent them from accessing your roof space.

This 2mm steel mesh is compliant for use as an ember guard under AS3959:2018 for every BAL level: BAL 12.5, 19, 29, 40 and FZ (Flame Zone). Learn more about bushfire and ember guard compliance.

• Woven and welded from 0.5mm thick steel strands, then hot zinc dipped and finished with a durable powder coat

• Compliant for use as an ember guard under AS3959:2018 in BAL 12.5, 19, 29, 40 and FZ.

• Non-combustible and compliant for use as a gutter guard in bushfire-prone areas under AS3959:2018 for BAL 12.5, 19, 29, 40 and FZ. [learn more about bushfire and ember guard compliance.]

• Screw-down roof fitting, screw-down gutter fixing

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 33 colours available designed to match the COLORBOND® range

• 2mm steel mesh roll (600mm wide)

• Screw-down bullnose profiles and pilot tip screws for the roof-side installation

• Screw-down flat metal gutter trim and pilot tip screws for the gutter-side installation

• Everything is provided in the colour you select

This kit uses screw-down bullnose profiles to secure the mesh to your roof, fastened with pilot tip screws. On the gutter side, the screw-down flat metal gutter trim sits flush against the gutter edge and is fastened with pilot tip screws. Learn more about our pilot tip screws.

For increased load-bearing capacity, this kit is also available with our screw-down multi-lock trim, which increases the strength of the mesh connection by over 200%. You can switch your gutter fitting to the screw-down multi-lock trim above. [learn more about our screw-down multi-lock trim.]

This product is backed by a 15 year product warranty.