This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed to suit a range of ribbed metal roof profiles, including Klip-Lok®, Trimdek®, Spandek® and Longspan®. The 1-inch profile is small enough to fit between the ribs on different roof types, making it a flexible option.

The 4mm aperture (hole size) of the mesh blocks medium and large leaves, including gum leaves, gumnuts and silky oak. Best suited for properties where the surrounding trees produce medium-sized foliage rather than fine needles or small leaves. If the trees around your property include wattle, jacaranda, poinciana or pine, you may need the finer 2mm aperture instead.

Is your home in a bushfire area?

This is a screw-free kit, made for homes outside bushfire (BAL) zones. The mesh itself is non-combustible, but the adhesives and clips that hold it in place are not, so it is not compliant for BAL-rated areas under AS3959:2018. If your home is in a bushfire-prone area, we make a screw-fixed system that is compliant, so talk to us and we will help you choose. Learn more about bushfire and ember guard compliance.

• Aluminium mesh, 0.5mm strand thickness, powder coated

• Screw-free roof fitting, screw-down gutter fixing

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 30 colours available designed to match the COLORBOND® range

• 4mm aluminium mesh roll (500mm wide)

• Screw-free mini profiles for the roof-side installation

• Screw-down standard metal gutter trim and pilot tip screws for the gutter-side installation

• Everything is provided in the colour you select

This kit uses screw-free mini profiles to secure the mesh to your roof. The profiles bond to the roof surface using Sikaflex FC-11 adhesive (not included in kit). On the gutter side, the screw-down standard metal gutter trim is fastened to the gutter lip with pilot tip screws, holding the mesh firmly in place. Learn more about our pilot tip screws.

For increased load-bearing capacity, this kit is also available with our screw-down multi-lock trim, which increases the strength of the mesh connection by over 200%. You can switch your gutter fitting to the screw-down multi-lock trim above. [learn more about our screw-down multi-lock trim.]

This product is backed by a 15 year product warranty.