This product is designed for box gutter protection. A box gutter is a flat-bottomed gutter set into the roof structure, typically running between two roof sections or behind a parapet wall. The mesh sits over the top of the box gutter, forming a continuous barrier across the opening.

Designed for corrugated roofing, one of Australia's most popular roof profiles.

The 2mm aperture (hole size) of the mesh blocks leaves of all sizes, from large palm fronds and bamboo down to fine wattle, jacaranda and poinciana leaves. Best suited for properties with fine-leafed trees or where you want the highest level of leaf protection.

This 2mm aluminium mesh is compliant for use as an ember guard under AS3959:2018 for BAL 12.5, 19 and 29.

If you need protection in BAL 40 and FZ (Flame Zone), our 2mm steel mesh is compliant for use as an ember guard in BAL 40 and FZ. Learn more about bushfire and ember guard compliance.

• Aluminium mesh, 0.5mm strand thickness, powder coated

• Compliant for use as an ember guard under AS3959:2018 in BAL 12.5, 19 and 29.

• Non-combustible and compliant for use as a gutter guard in bushfire-prone areas under AS3959:2018 for BAL 12.5, 19, 29, 40 and FZ. [learn more about bushfire and ember guard compliance.]

• Screw-down roof fitting on both sides of the box gutter

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 30 colours available designed to match the COLORBOND® range

• 2mm aluminium mesh roll (750mm wide)

• Screw-down corrugated saddles

• Pilot tip screws

• Everything is provided in the colour you select

This kit uses screw-down corrugated saddles to secure the mesh on both sides of the box gutter, fastened with pilot tip screws. Learn more about our pilot tip screws.

This product is backed by a 15 year product warranty.