This product is designed for eaves gutter protection. The mesh fits from the outside edge of the gutter across the gutter section and is secured to the roof surface, forming a continuous barrier across the gutter opening.

Designed for tile roofing, one of the most common residential roof types in Australia.

The 2mm aperture (hole size) of the mesh blocks leaves of all sizes, from large palm fronds and bamboo down to fine wattle, jacaranda and poinciana leaves. Best suited for properties with fine-leafed trees or where you want the highest level of leaf protection.

This 2mm aluminium mesh is compliant for use as an ember guard under AS3959:2018 for BAL 12.5, 19 and 29.

If you need protection in BAL 40 and FZ (Flame Zone), our 2mm steel mesh is compliant for use as an ember guard in BAL 40 and FZ. Learn more about bushfire and ember guard compliance.

• Aluminium mesh, 0.5mm strand thickness, powder coated

• Compliant for use as an ember guard under AS3959:2018 in BAL 12.5, 19 and 29.

• Non-combustible and compliant for use as a gutter guard in bushfire-prone areas under AS3959:2018 for BAL 12.5, 19, 29, 40 and FZ. [learn more about bushfire and ember guard compliance.]

• No roof-side fittings, mesh tucks under the first row of tiles; no gutter trim

• Designed to work with common Australian roofing materials, including COLORBOND® steel and Zincalume®, so your mesh material and roof material are fully compatible

• 30 colours available designed to match the COLORBOND® range

• 2mm aluminium mesh roll (500mm wide)

• Pilot tip screws only for the gutter-side installation

• Everything is provided in the colour you select

This kit secures the mesh by tucking the top edge under the first row of tiles, so no roof-side fittings are needed. On the gutter side, the mesh is secured directly to the gutter edge with pilot tip screws at approximately 250mm intervals. Learn more about our pilot tip screws.

This product is backed by a 15 year product warranty.